Study on the Structure of Forest Products Industry and Its Impact on Ecological Environment

Xiaoyu Chen; Peihong Liu; Yifu Yuan

doi:doi:10.11648/j.jeece.20220703.18

| Peer-Reviewed

Study on the Structure of Forest Products Industry and Its Impact on Ecological Environment

Xiaoyu Chen, Peihong Liu, Yifu Yuan

Published in Journal of Energy, Environmental & Chemical Engineering (Volume 7, Issue 3)

Received: 5 September 2022 Accepted: 21 September 2022 Published: 29 September 2022

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

The forest product industry is the main economic pillar of forestry development. However, the industrial concentration of China's forest product industry is obviously low, and there is a lack of some leading enterprises with particularly strong competitiveness. The development trend of most of the forest product industries is basically the same, the content of the industrial structure is relatively consistent, and the characteristics are few. All localities have failed to form a unique industrial layout and development direction. The low industrial concentration and the high similarity of the industrial structure bring about low-level repeated construction and excessive competition, increase the environmental pollution load and control difficulty, and lead to the aggravation of the ecological environment pressure. The resulting ecological environment problem is that the plywood production is too large, which may further worsen the severe situation of natural forest over cutting in China, and aggravate the existing water and soil loss and ecological damage. The production and development of particleboard and fiberboard with abundant raw materials are small in scale, few in variety, and lack of deep processing. The application fields are severely restricted, and the forest resources are not efficiently utilized, causing huge waste and polluting the environment. This paper analyzes the structure of China's forest products industry and its impact on the environment. According to the requirements of the current global environmental protection trend for the development of the world's forest industry technology, the direction and some ways of the structural adjustment of China's forest industry were put forward.

Published in	Journal of Energy, Environmental & Chemical Engineering (Volume 7, Issue 3)
DOI	10.11648/j.jeece.20220703.18
Page(s)	107-110
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Forest Products Industry, Industrial Structure, Ecological Environment, Influence

References

[1]	Guo C. Y (2022). Overview of world paper industry in 2020. China Pulp & Paper, 41 (4): 133-137.
[2]	Guo S H (2021). The high quality development strategy of paper industry under the background of new era. Hunan Papermaking, 50 (3): 8-10.
[3]	Cheng L (2021). esearch progress of papermaking wastewater treatment technology. Chemical Engineer, 35 (5): 60-62.
[4]	Cheng Y. J, Zhang L, Wang H. S, Jia X. Y, Dong Y (2022). Carbon emission characteristics and "Double Carbon" target path of China's paper industry. China Pulp & Paper, 41 (4): 1-5.
[5]	Fang G. G, Sheng K. Z, Li X. L, Shi J. Q (2021). Supply strategy of fiber sources for China's paper industry under policies of restriction usage of plastic and banning solid wastes importation. China Pulp & Paper, 40 (7): 1-7.
[6]	Fu X (2022). Potential and development of bamboo pulping and papermaking in China. World Bamboo and Rattan, 20 (1): 54-57.
[7]	Liu W. C, Song K. M, Zhang Yu F (2022). Advanced treatment paper-making wastewater by catalytic ozonation. Industrial Water Treatment, 42 (1): 154-157.
[8]	He J (2021). Research progress of wastewater treatment technology in pulp and paper industry. Shandong Chemical Industry, 50 (11): 60-61.
[9]	Liu X, Chen Z. Q (2021). Study on the present situation and Countermeasures of papermaking wastewater pollution treatment. Jiangsu Salt Science & Technology, 48 (2): 20-21.
[10]	Cai B, Deng J. Z, Tang X, Ma R. F, Ren P. Y (2022). Dangerous characteristics and influencing factors of fly ash from papermaking sludge incineration. China Pulp & Paper, 41 (1): 1-5.
[11]	Zhang Z, Zhang H. L, Zhang H. Q (2022). Green construction and sustainable development from engineering companies of pulp and paper making engineering based on the "Carbon Peak and Carbon Neutrality" goals. China Pulp & Paper, 41 (3): 92-96.
[12]	Jia H, Fei B. H, Sun F. B, Ma Q. L, Su N (2022). The importance of establishing the storage mechanism of bamboo chips for papermaking. Journal of Bamboo Research, 41 (1): 74-79.
[13]	He W. L, Wu S. B, Wan J. Q (2022). Ozone catalytic advanced oxidation technology for secondary effluent of paper-making mill. Transactions of China Pulp and Paper, 37 (1): 79-86.
[14]	Zhang Y. S, Zhou L, Cheng L, Jiang Y. Q, Li J. M. (2022). 43 (14): 39-43.
[15]	Li P (2021). Research progress of membrane separation technology in treating papermaking wastewater. Cleaning World, 37 (5): 8-9.

Cite This Article

Plain Text BibTeX RIS

APA Style

Xiaoyu Chen, Peihong Liu, Yifu Yuan. (2022). Study on the Structure of Forest Products Industry and Its Impact on Ecological Environment. Journal of Energy, Environmental & Chemical Engineering, 7(3), 107-110. https://doi.org/10.11648/j.jeece.20220703.18

Copy | Download

ACS Style

Xiaoyu Chen; Peihong Liu; Yifu Yuan. Study on the Structure of Forest Products Industry and Its Impact on Ecological Environment. J. Energy Environ. Chem. Eng. 2022, 7(3), 107-110. doi: 10.11648/j.jeece.20220703.18

Copy | Download

AMA Style

Xiaoyu Chen, Peihong Liu, Yifu Yuan. Study on the Structure of Forest Products Industry and Its Impact on Ecological Environment. J Energy Environ Chem Eng. 2022;7(3):107-110. doi: 10.11648/j.jeece.20220703.18

Copy | Download

@article{10.11648/j.jeece.20220703.18,
  author = {Xiaoyu Chen and Peihong Liu and Yifu Yuan},
  title = {Study on the Structure of Forest Products Industry and Its Impact on Ecological Environment},
  journal = {Journal of Energy, Environmental & Chemical Engineering},
  volume = {7},
  number = {3},
  pages = {107-110},
  doi = {10.11648/j.jeece.20220703.18},
  url = {https://doi.org/10.11648/j.jeece.20220703.18},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jeece.20220703.18},
  abstract = {The forest product industry is the main economic pillar of forestry development. However, the industrial concentration of China's forest product industry is obviously low, and there is a lack of some leading enterprises with particularly strong competitiveness. The development trend of most of the forest product industries is basically the same, the content of the industrial structure is relatively consistent, and the characteristics are few. All localities have failed to form a unique industrial layout and development direction. The low industrial concentration and the high similarity of the industrial structure bring about low-level repeated construction and excessive competition, increase the environmental pollution load and control difficulty, and lead to the aggravation of the ecological environment pressure. The resulting ecological environment problem is that the plywood production is too large, which may further worsen the severe situation of natural forest over cutting in China, and aggravate the existing water and soil loss and ecological damage. The production and development of particleboard and fiberboard with abundant raw materials are small in scale, few in variety, and lack of deep processing. The application fields are severely restricted, and the forest resources are not efficiently utilized, causing huge waste and polluting the environment. This paper analyzes the structure of China's forest products industry and its impact on the environment. According to the requirements of the current global environmental protection trend for the development of the world's forest industry technology, the direction and some ways of the structural adjustment of China's forest industry were put forward.},
 year = {2022}
}

Copy | Download

TY  - JOUR
T1  - Study on the Structure of Forest Products Industry and Its Impact on Ecological Environment
AU  - Xiaoyu Chen
AU  - Peihong Liu
AU  - Yifu Yuan
Y1  - 2022/09/29
PY  - 2022
N1  - https://doi.org/10.11648/j.jeece.20220703.18
DO  - 10.11648/j.jeece.20220703.18
T2  - Journal of Energy, Environmental & Chemical Engineering
JF  - Journal of Energy, Environmental & Chemical Engineering
JO  - Journal of Energy, Environmental & Chemical Engineering
SP  - 107
EP  - 110
PB  - Science Publishing Group
SN  - 2637-434X
UR  - https://doi.org/10.11648/j.jeece.20220703.18
AB  - The forest product industry is the main economic pillar of forestry development. However, the industrial concentration of China's forest product industry is obviously low, and there is a lack of some leading enterprises with particularly strong competitiveness. The development trend of most of the forest product industries is basically the same, the content of the industrial structure is relatively consistent, and the characteristics are few. All localities have failed to form a unique industrial layout and development direction. The low industrial concentration and the high similarity of the industrial structure bring about low-level repeated construction and excessive competition, increase the environmental pollution load and control difficulty, and lead to the aggravation of the ecological environment pressure. The resulting ecological environment problem is that the plywood production is too large, which may further worsen the severe situation of natural forest over cutting in China, and aggravate the existing water and soil loss and ecological damage. The production and development of particleboard and fiberboard with abundant raw materials are small in scale, few in variety, and lack of deep processing. The application fields are severely restricted, and the forest resources are not efficiently utilized, causing huge waste and polluting the environment. This paper analyzes the structure of China's forest products industry and its impact on the environment. According to the requirements of the current global environmental protection trend for the development of the world's forest industry technology, the direction and some ways of the structural adjustment of China's forest industry were put forward.
VL  - 7
IS  - 3
ER  -

Copy | Download

Author Information

Xiaoyu Chen

Tai'an Culai Mountain Wenhe Scenic Area Management Committee, Taian, China
Peihong Liu

Shandong Institute of Geological Sciences, Jinan, China
Yifu Yuan

College of Forestry, Shandong Agricultural University, Taian, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Xiaoyu Chen, Peihong Liu, Yifu Yuan. (2022). Study on the Structure of Forest Products Industry and Its Impact on Ecological Environment. Journal of Energy, Environmental & Chemical Engineering, 7(3), 107-110. https://doi.org/10.11648/j.jeece.20220703.18

Copy | Download

ACS Style

Xiaoyu Chen; Peihong Liu; Yifu Yuan. Study on the Structure of Forest Products Industry and Its Impact on Ecological Environment. J. Energy Environ. Chem. Eng. 2022, 7(3), 107-110. doi: 10.11648/j.jeece.20220703.18

Copy | Download

AMA Style

Xiaoyu Chen, Peihong Liu, Yifu Yuan. Study on the Structure of Forest Products Industry and Its Impact on Ecological Environment. J Energy Environ Chem Eng. 2022;7(3):107-110. doi: 10.11648/j.jeece.20220703.18

Copy | Download

@article{10.11648/j.jeece.20220703.18,
  author = {Xiaoyu Chen and Peihong Liu and Yifu Yuan},
  title = {Study on the Structure of Forest Products Industry and Its Impact on Ecological Environment},
  journal = {Journal of Energy, Environmental & Chemical Engineering},
  volume = {7},
  number = {3},
  pages = {107-110},
  doi = {10.11648/j.jeece.20220703.18},
  url = {https://doi.org/10.11648/j.jeece.20220703.18},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jeece.20220703.18},
  abstract = {The forest product industry is the main economic pillar of forestry development. However, the industrial concentration of China's forest product industry is obviously low, and there is a lack of some leading enterprises with particularly strong competitiveness. The development trend of most of the forest product industries is basically the same, the content of the industrial structure is relatively consistent, and the characteristics are few. All localities have failed to form a unique industrial layout and development direction. The low industrial concentration and the high similarity of the industrial structure bring about low-level repeated construction and excessive competition, increase the environmental pollution load and control difficulty, and lead to the aggravation of the ecological environment pressure. The resulting ecological environment problem is that the plywood production is too large, which may further worsen the severe situation of natural forest over cutting in China, and aggravate the existing water and soil loss and ecological damage. The production and development of particleboard and fiberboard with abundant raw materials are small in scale, few in variety, and lack of deep processing. The application fields are severely restricted, and the forest resources are not efficiently utilized, causing huge waste and polluting the environment. This paper analyzes the structure of China's forest products industry and its impact on the environment. According to the requirements of the current global environmental protection trend for the development of the world's forest industry technology, the direction and some ways of the structural adjustment of China's forest industry were put forward.},
 year = {2022}
}

Copy | Download

TY  - JOUR
T1  - Study on the Structure of Forest Products Industry and Its Impact on Ecological Environment
AU  - Xiaoyu Chen
AU  - Peihong Liu
AU  - Yifu Yuan
Y1  - 2022/09/29
PY  - 2022
N1  - https://doi.org/10.11648/j.jeece.20220703.18
DO  - 10.11648/j.jeece.20220703.18
T2  - Journal of Energy, Environmental & Chemical Engineering
JF  - Journal of Energy, Environmental & Chemical Engineering
JO  - Journal of Energy, Environmental & Chemical Engineering
SP  - 107
EP  - 110
PB  - Science Publishing Group
SN  - 2637-434X
UR  - https://doi.org/10.11648/j.jeece.20220703.18
AB  - The forest product industry is the main economic pillar of forestry development. However, the industrial concentration of China's forest product industry is obviously low, and there is a lack of some leading enterprises with particularly strong competitiveness. The development trend of most of the forest product industries is basically the same, the content of the industrial structure is relatively consistent, and the characteristics are few. All localities have failed to form a unique industrial layout and development direction. The low industrial concentration and the high similarity of the industrial structure bring about low-level repeated construction and excessive competition, increase the environmental pollution load and control difficulty, and lead to the aggravation of the ecological environment pressure. The resulting ecological environment problem is that the plywood production is too large, which may further worsen the severe situation of natural forest over cutting in China, and aggravate the existing water and soil loss and ecological damage. The production and development of particleboard and fiberboard with abundant raw materials are small in scale, few in variety, and lack of deep processing. The application fields are severely restricted, and the forest resources are not efficiently utilized, causing huge waste and polluting the environment. This paper analyzes the structure of China's forest products industry and its impact on the environment. According to the requirements of the current global environmental protection trend for the development of the world's forest industry technology, the direction and some ways of the structural adjustment of China's forest industry were put forward.
VL  - 7
IS  - 3
ER  -

Copy | Download