Uranium Sorption Using Lewatit MonoPlus M500 from Sulphate Media

Sally Sayed Muhammad

doi:doi:10.11648/j.sjc.20200801.12

| Peer-Reviewed

Uranium Sorption Using Lewatit MonoPlus M500 from Sulphate Media

Sally Sayed Muhammad

Published in Science Journal of Chemistry (Volume 8, Issue 1)

Received: 18 September 2019 Accepted: 9 December 2019 Published: 10 March 2020

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

The present work has focused on the uptake behavior of uranium (VI) from sulfuric acid media by using Lewatit MonoPlus M500 resin. The influence of parameters, namely pH, U (VI) initial concentration, contact time and temperature were investigated. The optimum conditions were explicated via the sorption kinetics, the isotherm models and the thermodynamic data to determine the behavior of the uranium adsorption. The studied resin is an efficient sorbent for U (VI) ions with maximum sorption capacity q_max 181.82 mg g^-1 and agreed with both the pseudo-second order kinetic model and Langmuir isotherm. Thermodynamic characteristics showed that the process was spontaneous (ΔG° < 0) and exothermic (ΔH° < 0) in nature. Finally, by application of the results to increase the uranium assay and purity in the working impure uranium concentrate which produced at Gattar pilot plant, Egypt. The assay increase from about 36% up to 71%, while the purity up to 94%.

Published in	Science Journal of Chemistry (Volume 8, Issue 1)
DOI	10.11648/j.sjc.20200801.12
Page(s)	7-19
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Uranium, Sorption, Sulphuric Media, Lewatit Mono Plus M500

References

[1]	https://www.obermeier.de/en/products/ion-exchanger/.
[2]	A. V. Zhizhin, I. N. Zakolodnyi, A. A. Zmitrodan, S. N. Orlov, Yu. V. Tsapko, A. V. Luzakov, D. S. Urtenov, G. P. Shovikov, K. A. Vagin, Results of Studies and Life Tests of Russian-Made Monodisperse Nuclear-Grade Ion-Exchange Resins, Atomic Energy, 126 (2019) 96–102.
[3]	F. J. Alguacil, E. Escudero, Removal of arsenic (V) from aqueous wastes by ion exchange with Lewatit MP64 resin, Desalination and water treatment, 261 (2018) 133-257.
[4]	Bayer. Report: Efficiency Is a Matter of Form. http://www.lewatit.co.kr.
[5]	N. B. Issa, V. N. Rajaković-Ognjanović, B. M. Jovanović, L. V. Rajaković, Separation and determination of arsenic species in water by selective exchange and hybrid resins, Analytica Chimica Acta, 673 (2010) 185–193.
[6]	D. Kołodyńska, H. Hubicka, Z. Hubicki, Studies of application of monodisperse anion exchangers in sorption of heavy metal complexes with IDS, Desalination, 239 (2009) 216–228.
[7]	A. N. Nikoloski, K. Ang, D. Li, Recovery of platinum, palladium and rhodium from acidic chloride leach solution using ion exchange resins, Hydrometallurgy, 152 (2015) 20-32.
[8]	L. Rafati, A. H. Mahvi, A. R. Asgari, S. S. Hosseini, Removal of chromium (VI) from aqueous solutions using Lewatit FO36 nano ion exchange resin, Int. J. Environ. Sci. Tech., 7 (2010) 147-156.
[9]	A. Wołowicz, Z. Hubicki, The use of the chelating resin of a new generation Lewatit MonoPlus TP-220 with the bis-picolylamine functional groups in the removal of selected metal ions from acidic solutions, Chem. Eng. J., 197 (2012) 493–508.
[10]	A. Wołowicz, Z. Hubicki, Ion Exchange Recovery of Palladium (II) from Acidic Solutions Using Monodisperse Lewatit SR–7, Ind. Eng. Chem. Res., 51 (2012) 16688−16696.
[11]	S. Y. Afifi, M. M. Abo-Aly, S. M. Elashry, Alkaline Leaching for Recovery of Uranium and Copper from Calcareous Shale, Um Bogma formation, G. Allouga, Southwestern Sinai, Egypt, Arab J. Nucl. Sci. Appl, 50 (2017) 213-228.
[12]	A. H. Orabi, K. A. Rabia, E. E. Elshereafy, A. R. Salem, Application of Commercial Adsorbent for Rare earth elements - Uranium Mutual Separation and Purification, Mediterr. J. Chem., 6 (2018) 238-254.
[13]	Z. Marczenko, M. Balcerzak, Separation, preconcentration and spectrophotometry in inorganic analysis. Elsevier Science B. V., Amsterdam, (2000) p 521.
[14]	W. Davies, W. Gray, A rapid and specific volumetric method for the precise determination of uranium using ferrous sulfate as a reductant, Talanta, 11 (1964) 1203–1211.
[15]	G. Crini, H. N. Peindy, F. Gimbert, C. Robert, Removal of C. I. Basic Green 4 (Malachite Green) from aqueous solutions by adsorption processes using batch studies, Sep. Purif. Technol., 53 (2007) 97-110.
[16]	A. Mellah, S. Chegrouche, M. Barkat, The removal of uranium (VI) from aqueous solutions onto activated carbon: Kinetic and thermodynamic investigations, J. Colloid. Interface Sci., 296 (2006) 434-441.
[17]	S. M. Ghoreishi, M. Behpour, S. Mazaheri, Motaghedifard High sensitive sensorbased on carbon nanotube electrode for determination of lanthanum in the presence of calcon carboxylic acid, Anal. Lett. 46 (2013) 156–170.
[18]	F. Nachod, J. Schubert, Ion Exchange Technolgy, Academic Press Inc. Publishers New York, (1956).
[19]	G. Sheng, J. Sheng, S. Yang, J. Hu, X. Wang, Behavior and mechanism of Ni (II) uptake on MnO₄ by a combination of macroscopic and EXAFS investigation, J Radioanal. Nucl. Chem., 289 (2011) 129-135.
[20]	H. Yan, L. Yang, Z. Yang, H. Yang, A. Li, R. Cheng., Preparation of chitosan/poly (acrylic acid) magnetic composite microspheres and applications in the removal of copper (II) ions from aqueous solutions, J. Hazard. Mater., 371 (2012) 229-230.
[21]	N. Li, R. B. Bai, Copper adsorption on chitosan–cellulose hydrogel beads: behaviors and mechanisms, Sep. Purif. Technol., 42 (2005) 237-247.
[22]	I. Langmuir, The adsorption of gases on plane surfaces of glass, mica and platinum, J. Amer. Chem. Soc., 40 (1918) 1361-1403.
[23]	K. Y. Foo, B. H. Hameed, Insights into the modeling of adsorption isotherm systems, Chem. Eng. J., 156 (2010) 2-10.
[24]	K. Bharathi, S. Ramesh, Removal of dyes using agricultural waste as low-cost adsorbents: a review, Appl. Water Sci., 3 (2013) 773–790.
[25]	S. Lagergren, About the Theory of So-Called Adsorption of Soluble Substances, Kungliga Svenska Vetenskapsakademiens Handlingar, 24 (1898) 1-39.
[26]	H. M. F. Freundlich, U¨ ber die adsorption in lo¨sungen, Z. Phys. Chem., 57 (1906) 385–470.
[27]	E. Voudrias, F. Fytianos and E. Bozani, Sorption Description isotherms of Dyes from aqueous solutions and Waste Waters with Different Sorbent materials, Global Nest, The Int. J., 4 (2002) 75-83.
[28]	S. Mohan, and J. Karthikeyan, Removal of lignin and tannin color from aqueous solution by adsorption onto activated carbon solution by adsorption onto activated charcoal, Environ. Pollut., 97, (1997) 183-187.
[29]	A. Gunay, E. Arslankaya, I. Tosun, Lead removal from aqueous solution by natural and pretreated clinoptilolite: adsorption equilibrium and kinetics, J. Hazard. Mater., 146 (2007) 362–371.
[30]	A. Dabrowski, Adsorption—from theory to practice, Adv. Colloid Interface Sci., 93 (2001) 135–224.
[31]	M. M. Dubinin, The potential theory of adsorption of gases and vapors for adsorbents with energetically non-uniform surface, Chem. Rev., 60 (1960) 235–266.
[32]	J. P. Hobson, Physical adsorption isotherms extending from ultra-high vacuum to vapor pressure, J. Phys. Chem., 73 (1969) 2720–2727.
[33]	J. Xu, M. Chen, C. Zhang, Z. Yi, Adsorption of uranium (VI) from aqueous solution by diethylenetriamine-functionalized magnetic chitosan, J. Radioanal. Nucl., Chem. 298 (2013) 1375-1383.
[34]	H. M. F. Freundlich, Over the Adsorption in Solution, J. Phys. Chem. 57 (1906) 385-471.
[35]	A. Rahmati, A. Ghaemi, M. Samadfam, Kinetic and thermodynamic studies of uranium (VI) adsorption using Amberlite IRA-910 resin, Annals of Nuclear Energy, 39 (2012) 42–48.
[36]	M. F. Cheira, B. M. Atia, M. N. Kouraim, Uranium (VI) recovery from acidic leach liquor by Ambersep 920U SO₄ resin: Kinetic, equilibrium and thermodynamic studies, Journal of Radiation Research and Applied Sciences, 10 (2017) 307-319.
[37]	Y. M. Khawassek, A. M. Masoud, M. H. Taha, A. E. M. Hussein, Kinetics and thermodynamics of uranium ion adsorption from waste solution using Amberjet 1200 H as cation exchanger, J. Radioanal. Nucl. Chem., 315 (2018) 493-502.
[38]	N. Reynier, R. Lastra, C. Laviolette, J. Fiset, N. Bouzoubaâ, M. Chapmanb, Uranium Recovery by Ion Exchange from Sulfuric Acid Liquor in Iodide and Chloride Media, Solvent Extraction and Ion Exchange, 34 (2016) 188-200.
[39]	H. Qiu, L. Lv, B. Pan, Q. Zhang, W. Zhang, Q. Zhang, Critical review in adsorption kinetic models, J. Zhejiang Univ. Sci. A, 10 (2009) 716-724.
[40]	S. Yiacoumi, C. Tien. Kinetics of metal ion adsorption from aqueous solutions: Models, Algorithms, and Applications. Kluwer Academic publishers. USA (1995).
[41]	Y. S. Ho, Review of second-order models for adsorption systems, J. Hazard. Mater., 136 (2006) 681-689.
[42]	J. Jachuła, D. Kołodyńska, Z. Hubicki, Sorption of Cu(II) and Ni(II) ions in the presence of the methylglycinediacetic acid by microporous ion exchangers and sorbents from aqueous solutions, Cent. Eur. J. Chem., 9 (2011) 52-65.
[43]	S. Choi, Y. C. Nho, Adsorption of UO²⁺₂ by polyethylene adsorbents with amidoxime, carboxyl, and amidoxime/carboxyl group, Radiation Physics and Chemistry, 57 (2000) 187-193.
[44]	C. R. Preetha, J. M. Gladis, T. P. Rao, G. Venkateswaran, Removal of toxic uranium from synthetic nuclear power reactor effluents using uranyl ion imprinted polymer particles, Environmental Science and Technology, 40 (2006) 3070–3074.
[45]	D. James, G. Venkateswaran, T. P. Rao, Removal of uranium from mining industry feed simulant solutions using trapped amidoxime functionality within a mesoporous imprinted polymer material, Microporous mesoporous materials, 119 (2009) 165–170.
[46]	A. M. Shallaby, M. M. Mostafa, K. M. Ibrahim, M. N. H. Moussa, New uranyl (VI) complexes with hydrazine-oximes derived from aromatic acid hydrazides and biacetylmonoxime-l, Spectro chimica Acta Part A: Molecular Spectroscopy, 40 (1984) 999-1002.
[47]	M. F. Hasan, A. M. Seyam, H. A. Hodali, Some dioxouranium (VI) complexes of azo-oximes, Polyhedron, 11 (1992) 1733-1736.
[48]	A. Yacoutanour, A. K. T. Maki, M. M. Mostafa, Synthesis and spectroscopic studies of dioxouranium (VI) complexes derived from some oximes and containing dihydroxo bridges, Spectro chimica Acta, 44A (1988) 1291-1296.
[49]	G. M. Hussein, S. S. Muhammad, N. A. Gomaa, M. R. Shehata, W. M. Hosny, Potentiality of methyltrioctylammonium chloride ligand for selective extraction of the Uranium (VI) metal ions from selective carbonate leach liquor, J, Dis. Sci. Tec., 38 (2017) 1204–1210.
[50]	M. F. Cheira, R. A. Ghazala, K. F. Mahmoud, An upgrading procedure for the uranium concentrate product of Gattar pilot plant via ammonium carbonate, Inorganic Chemistry An Indian Journal, 8 (2013) 61-68.

Cite This Article

Plain Text BibTeX RIS

APA Style

Sally Sayed Muhammad. (2020). Uranium Sorption Using Lewatit MonoPlus M500 from Sulphate Media. Science Journal of Chemistry, 8(1), 7-19. https://doi.org/10.11648/j.sjc.20200801.12

Copy | Download

ACS Style

Sally Sayed Muhammad. Uranium Sorption Using Lewatit MonoPlus M500 from Sulphate Media. Sci. J. Chem. 2020, 8(1), 7-19. doi: 10.11648/j.sjc.20200801.12

Copy | Download

AMA Style

Sally Sayed Muhammad. Uranium Sorption Using Lewatit MonoPlus M500 from Sulphate Media. Sci J Chem. 2020;8(1):7-19. doi: 10.11648/j.sjc.20200801.12

Copy | Download

@article{10.11648/j.sjc.20200801.12,
  author = {Sally Sayed Muhammad},
  title = {Uranium Sorption Using Lewatit MonoPlus M500 from Sulphate Media},
  journal = {Science Journal of Chemistry},
  volume = {8},
  number = {1},
  pages = {7-19},
  doi = {10.11648/j.sjc.20200801.12},
  url = {https://doi.org/10.11648/j.sjc.20200801.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sjc.20200801.12},
  abstract = {The present work has focused on the uptake behavior of uranium (VI) from sulfuric acid media by using Lewatit MonoPlus M500 resin. The influence of parameters, namely pH, U (VI) initial concentration, contact time and temperature were investigated. The optimum conditions were explicated via the sorption kinetics, the isotherm models and the thermodynamic data to determine the behavior of the uranium adsorption. The studied resin is an efficient sorbent for U (VI) ions with maximum sorption capacity qmax 181.82 mg g-1 and agreed with both the pseudo-second order kinetic model and Langmuir isotherm. Thermodynamic characteristics showed that the process was spontaneous (ΔG° < 0) and exothermic (ΔH° < 0) in nature. Finally, by application of the results to increase the uranium assay and purity in the working impure uranium concentrate which produced at Gattar pilot plant, Egypt. The assay increase from about 36% up to 71%, while the purity up to 94%.},
 year = {2020}
}

Copy | Download

TY  - JOUR
T1  - Uranium Sorption Using Lewatit MonoPlus M500 from Sulphate Media
AU  - Sally Sayed Muhammad
Y1  - 2020/03/10
PY  - 2020
N1  - https://doi.org/10.11648/j.sjc.20200801.12
DO  - 10.11648/j.sjc.20200801.12
T2  - Science Journal of Chemistry
JF  - Science Journal of Chemistry
JO  - Science Journal of Chemistry
SP  - 7
EP  - 19
PB  - Science Publishing Group
SN  - 2330-099X
UR  - https://doi.org/10.11648/j.sjc.20200801.12
AB  - The present work has focused on the uptake behavior of uranium (VI) from sulfuric acid media by using Lewatit MonoPlus M500 resin. The influence of parameters, namely pH, U (VI) initial concentration, contact time and temperature were investigated. The optimum conditions were explicated via the sorption kinetics, the isotherm models and the thermodynamic data to determine the behavior of the uranium adsorption. The studied resin is an efficient sorbent for U (VI) ions with maximum sorption capacity qmax 181.82 mg g-1 and agreed with both the pseudo-second order kinetic model and Langmuir isotherm. Thermodynamic characteristics showed that the process was spontaneous (ΔG° < 0) and exothermic (ΔH° < 0) in nature. Finally, by application of the results to increase the uranium assay and purity in the working impure uranium concentrate which produced at Gattar pilot plant, Egypt. The assay increase from about 36% up to 71%, while the purity up to 94%.
VL  - 8
IS  - 1
ER  -

Copy | Download

Author Information

Sally Sayed Muhammad

Department of Uranium Ores Processing, Production Sector, Nuclear Materials Authority, Cairo, Egypt

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Sally Sayed Muhammad. (2020). Uranium Sorption Using Lewatit MonoPlus M500 from Sulphate Media. Science Journal of Chemistry, 8(1), 7-19. https://doi.org/10.11648/j.sjc.20200801.12

Copy | Download

ACS Style

Sally Sayed Muhammad. Uranium Sorption Using Lewatit MonoPlus M500 from Sulphate Media. Sci. J. Chem. 2020, 8(1), 7-19. doi: 10.11648/j.sjc.20200801.12

Copy | Download

AMA Style

Sally Sayed Muhammad. Uranium Sorption Using Lewatit MonoPlus M500 from Sulphate Media. Sci J Chem. 2020;8(1):7-19. doi: 10.11648/j.sjc.20200801.12

Copy | Download

@article{10.11648/j.sjc.20200801.12,
  author = {Sally Sayed Muhammad},
  title = {Uranium Sorption Using Lewatit MonoPlus M500 from Sulphate Media},
  journal = {Science Journal of Chemistry},
  volume = {8},
  number = {1},
  pages = {7-19},
  doi = {10.11648/j.sjc.20200801.12},
  url = {https://doi.org/10.11648/j.sjc.20200801.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sjc.20200801.12},
  abstract = {The present work has focused on the uptake behavior of uranium (VI) from sulfuric acid media by using Lewatit MonoPlus M500 resin. The influence of parameters, namely pH, U (VI) initial concentration, contact time and temperature were investigated. The optimum conditions were explicated via the sorption kinetics, the isotherm models and the thermodynamic data to determine the behavior of the uranium adsorption. The studied resin is an efficient sorbent for U (VI) ions with maximum sorption capacity qmax 181.82 mg g-1 and agreed with both the pseudo-second order kinetic model and Langmuir isotherm. Thermodynamic characteristics showed that the process was spontaneous (ΔG° < 0) and exothermic (ΔH° < 0) in nature. Finally, by application of the results to increase the uranium assay and purity in the working impure uranium concentrate which produced at Gattar pilot plant, Egypt. The assay increase from about 36% up to 71%, while the purity up to 94%.},
 year = {2020}
}

Copy | Download

TY  - JOUR
T1  - Uranium Sorption Using Lewatit MonoPlus M500 from Sulphate Media
AU  - Sally Sayed Muhammad
Y1  - 2020/03/10
PY  - 2020
N1  - https://doi.org/10.11648/j.sjc.20200801.12
DO  - 10.11648/j.sjc.20200801.12
T2  - Science Journal of Chemistry
JF  - Science Journal of Chemistry
JO  - Science Journal of Chemistry
SP  - 7
EP  - 19
PB  - Science Publishing Group
SN  - 2330-099X
UR  - https://doi.org/10.11648/j.sjc.20200801.12
AB  - The present work has focused on the uptake behavior of uranium (VI) from sulfuric acid media by using Lewatit MonoPlus M500 resin. The influence of parameters, namely pH, U (VI) initial concentration, contact time and temperature were investigated. The optimum conditions were explicated via the sorption kinetics, the isotherm models and the thermodynamic data to determine the behavior of the uranium adsorption. The studied resin is an efficient sorbent for U (VI) ions with maximum sorption capacity qmax 181.82 mg g-1 and agreed with both the pseudo-second order kinetic model and Langmuir isotherm. Thermodynamic characteristics showed that the process was spontaneous (ΔG° < 0) and exothermic (ΔH° < 0) in nature. Finally, by application of the results to increase the uranium assay and purity in the working impure uranium concentrate which produced at Gattar pilot plant, Egypt. The assay increase from about 36% up to 71%, while the purity up to 94%.
VL  - 8
IS  - 1
ER  -

Copy | Download