High-voltage Pulse Generation Using Electrostatic Induction in Capacitor

Taku Saiki

doi:doi:10.11648/j.ijecec.20190502.11

| Peer-Reviewed

High-voltage Pulse Generation Using Electrostatic Induction in Capacitor

Taku Saiki

Published in International Journal of Electrical Components and Energy Conversion (Volume 5, Issue 2)

Received: 19 October 2019 Accepted: 18 November 2019 Published: 22 November 2019

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Pulse power sources can produce high temperature or high-density extreme conditions within a short time. They have been introduced to various fields such as those in laser, fusion research, the production of plasma, shockwaves in water, water treatment, and exhaust gas treatments. Various high voltage pulse sources using insulated-gate bipolar transistor (IGBT) semiconductors with high voltage resistivity have been used. Also, Marx bank circuit is well known as an instrument that produces voltage pulses with low repetitive rates. These instruments have several advantages. However, their problems are a complex structure, high cost, and excessive weight. A simple method of producing high voltage pulses with short rising times based on electrostatic induction in external capacitor used for pulse power applications is proposed. The circuit has a simple structure and contains a minimum number of parts, which makes the instrument small and light weight. In fact, the generation of sawtoothed high voltage pulses with short rising times and low repetitive rates of a few 100 Hz was successfully conducted in experiments. Theoretical analysis was simultaneously undertaken. The numerically calculated results for generating high voltage pulses were goodly consistent with the experimental ones. Moreover, it has been confirmed that amplification of the output voltage by electro-hydrodynamics (EHD) electricity generation using a jet flame resulted in higher voltage pulses, lower electricity consumption, and high repetition rates.

Published in	International Journal of Electrical Components and Energy Conversion (Volume 5, Issue 2)
DOI	10.11648/j.ijecec.20190502.11
Page(s)	20-29
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

High Voltage Pulses, EHD Power Generation, Flame Jet, Electrostatic Induction

References

[1]	C. K. Patel, “Continuous-Wave Laser Action on Vibrational-Rotational Transitions of CO2”. Physical Review, 136 (5A) (1964) A1187.
[2]	M．K．Matzen, “Z Pinches as Intense X-ray Sources for High-energy Density Physics Applications”, Physics of Plasmas, 4 (1997) 1519.
[3]	H. Akiyama, S. Sakai, T. Sakugaw, and T. Namihira, “Environmental Applications of Repetitive Pulsed Power”, IEEE Trans. Dielectr. and Electr. Insulat., 14 (2007) 825.
[4]	B. Sun, M. Sato, “Use of a Pulsed High-voltage Discharge for Removal of Organic Compounds in Aqueous Solution”, J. Phys. D: Appl. Phys., 32 (1999) 1908.
[5]	J. S. Clements, M. Sato, R. H. Davis, “Preliminary Investigation of Prebreakdown Phenomena and Chemical Reactions using a Pulsed High-voltage Discharge in Water”, IEEE Trans. Ind. Appl., 23 (1987) 224.
[6]	I. V. Lisitsyn, H. Nomiyama, S. Katsuki and H. Akiyama, “Thermal Processes in a Streamer Discharge in Water, ”IEEE Trans. Dielectr. Electr. Insulat., 6 (3), (1999) 351.
[7]	M. Rezal, Dahaman Ishak, M. Sabri, “High Voltage Magnetic Pulse Generation using Capacitor Discharge Technique”, Alexandria Engineering Journal, 53 (2014) 803.
[8]	T. Shao, G. S. Sun, P. Yan, S. C. Zhang, “Breakdown Phenomena in Nitrogen due to Repetitive Nanosecond-pulse”, IEEE Trans. Dielectr. Electr. Insul., 14 (2007) 813.
[9]	E. L. Neau, “Environmental and Industrial Applications of Pulsed Power Systems”, IEEE Trans. Plasma Sci., 22 (1994) 2.
[10]	F. Fukawa, N. Shimomura, T. Yano, “Application of Nanosecond Pulse Power to Ozone Production by Streamer Corona”, IEEE Trans. Plasma Sci., 36 (2008) 2592.
[11]	F. Yan, B. Lin, C. Zhu, Y. Zhou, X. Liu, C. Guo, Q. Zou, “Experimental Investigation on Anthracite Coal Fragmentation by High-voltage Electrical Pulses in the Air Condition: Effect of Breakdown Voltage”, Fuel, 183 (2016) 583.
[12]	S. Katsuki, H. Akiyama, A. Abou-Ghazala and K. H. Schoenbach, “Parallel Streamer Discharges Between Wire and Plane Electrodis in Water”, IEEE Trans. Dielectr. Electr. Inslat., 9 (2002) 498.
[13]	M. Sato, T. Tokutake, T. Ohshima and A. T. Sugiarto, ” Aqueous Phenol Decomposition by Pulsed Discharges on the Water Surface“, IEEE Trans. Ind. Appl., 44, (2008) 1397.
[14]	H. Li, A. Lukanin, A. Tskhe, S. Sosnovskiy, “Multifunctional Generator of High-voltage Microsecond Pulses”, J. of Electrostatics, 90 (2017) 74.
[15]	T. Shao, et al., “Excitation of Atmospheric Pressure Uniform Dielectric Barrier Discharge using Repetitive Unipolar Nanosecond-pulse Generator”, IEEE Trans. Dielectr. Electr. Insul., 16 (2010) 1830.
[16]	T. Shao, D. D. Zhang, Y. Yu, “A Compact Repetitive Unipolar Nanosecond-pulse Generator for Dielectric Barrier Discharge Application”, IEEE Trans. Plasma Sci., 38 (2010) 1651.
[17]	K. Yan, E. J. M. van Heesch, A. J. M. Pemen, P. A. H. J. Huijbrechts, F. M. van Gompel, H. van Leuken, and Zdenek Matyáˇs, “A High-Voltage Pulse Generator for Corona Plasma Generation”, IEEE Trans. Ind. Appl., 38 (3) (2002) 866.
[18]	D. Wang, S. Okada, T. Matsumoto, T. Namihira and H. Akiyama, “Pulsed Discharge Induced by Nanosecond Pulsed Power in Atmospheric Air”, IEEE Plasma Sci., 38, (2010) 2746.
[19]	J.-D. Moon, “A Compact High-voltage Pulse Generator using a Rotary Airhole Sparkgap”, J. of Electrostatics, 65 (2007) 527.
[20]	R. A. Ford, Home Made Lightning, McGraw-Hill, New York, 2002.
[21]	T. Saiki, "Study on High Voltage Generation Using Flame Column and DC Power Supply", J. of Electrostatics, 70 (2012) 400.

Cite This Article

Plain Text BibTeX RIS

APA Style

Taku Saiki. (2019). High-voltage Pulse Generation Using Electrostatic Induction in Capacitor. International Journal of Electrical Components and Energy Conversion, 5(2), 20-29. https://doi.org/10.11648/j.ijecec.20190502.11

Copy | Download

ACS Style

Taku Saiki. High-voltage Pulse Generation Using Electrostatic Induction in Capacitor. Int. J. Electr. Compon. Energy Convers. 2019, 5(2), 20-29. doi: 10.11648/j.ijecec.20190502.11

Copy | Download

AMA Style

Taku Saiki. High-voltage Pulse Generation Using Electrostatic Induction in Capacitor. Int J Electr Compon Energy Convers. 2019;5(2):20-29. doi: 10.11648/j.ijecec.20190502.11

Copy | Download

@article{10.11648/j.ijecec.20190502.11,
  author = {Taku Saiki},
  title = {High-voltage Pulse Generation Using Electrostatic Induction in Capacitor},
  journal = {International Journal of Electrical Components and Energy Conversion},
  volume = {5},
  number = {2},
  pages = {20-29},
  doi = {10.11648/j.ijecec.20190502.11},
  url = {https://doi.org/10.11648/j.ijecec.20190502.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijecec.20190502.11},
  abstract = {Pulse power sources can produce high temperature or high-density extreme conditions within a short time. They have been introduced to various fields such as those in laser, fusion research, the production of plasma, shockwaves in water, water treatment, and exhaust gas treatments. Various high voltage pulse sources using insulated-gate bipolar transistor (IGBT) semiconductors with high voltage resistivity have been used. Also, Marx bank circuit is well known as an instrument that produces voltage pulses with low repetitive rates. These instruments have several advantages. However, their problems are a complex structure, high cost, and excessive weight. A simple method of producing high voltage pulses with short rising times based on electrostatic induction in external capacitor used for pulse power applications is proposed. The circuit has a simple structure and contains a minimum number of parts, which makes the instrument small and light weight. In fact, the generation of sawtoothed high voltage pulses with short rising times and low repetitive rates of a few 100 Hz was successfully conducted in experiments. Theoretical analysis was simultaneously undertaken. The numerically calculated results for generating high voltage pulses were goodly consistent with the experimental ones. Moreover, it has been confirmed that amplification of the output voltage by electro-hydrodynamics (EHD) electricity generation using a jet flame resulted in higher voltage pulses, lower electricity consumption, and high repetition rates.},
 year = {2019}
}

Copy | Download

TY - JOUR
T1 - High-voltage Pulse Generation Using Electrostatic Induction in Capacitor
AU - Taku Saiki
Y1 - 2019/11/22
PY - 2019
N1 - https://doi.org/10.11648/j.ijecec.20190502.11
DO - 10.11648/j.ijecec.20190502.11
T2 - International Journal of Electrical Components and Energy Conversion
JF - International Journal of Electrical Components and Energy Conversion
JO - International Journal of Electrical Components and Energy Conversion
SP - 20
EP - 29
PB - Science Publishing Group
SN - 2469-8059
UR - https://doi.org/10.11648/j.ijecec.20190502.11
AB - Pulse power sources can produce high temperature or high-density extreme conditions within a short time. They have been introduced to various fields such as those in laser, fusion research, the production of plasma, shockwaves in water, water treatment, and exhaust gas treatments. Various high voltage pulse sources using insulated-gate bipolar transistor (IGBT) semiconductors with high voltage resistivity have been used. Also, Marx bank circuit is well known as an instrument that produces voltage pulses with low repetitive rates. These instruments have several advantages. However, their problems are a complex structure, high cost, and excessive weight. A simple method of producing high voltage pulses with short rising times based on electrostatic induction in external capacitor used for pulse power applications is proposed. The circuit has a simple structure and contains a minimum number of parts, which makes the instrument small and light weight. In fact, the generation of sawtoothed high voltage pulses with short rising times and low repetitive rates of a few 100 Hz was successfully conducted in experiments. Theoretical analysis was simultaneously undertaken. The numerically calculated results for generating high voltage pulses were goodly consistent with the experimental ones. Moreover, it has been confirmed that amplification of the output voltage by electro-hydrodynamics (EHD) electricity generation using a jet flame resulted in higher voltage pulses, lower electricity consumption, and high repetition rates.
VL - 5
IS - 2
ER -

Copy | Download

Author Information

Taku Saiki

Department of Electrical and Electronic Engineering, Faculty of Engineering Science, Kansai University, Suita, Japan

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Taku Saiki. (2019). High-voltage Pulse Generation Using Electrostatic Induction in Capacitor. International Journal of Electrical Components and Energy Conversion, 5(2), 20-29. https://doi.org/10.11648/j.ijecec.20190502.11

Copy | Download

ACS Style

Taku Saiki. High-voltage Pulse Generation Using Electrostatic Induction in Capacitor. Int. J. Electr. Compon. Energy Convers. 2019, 5(2), 20-29. doi: 10.11648/j.ijecec.20190502.11

Copy | Download

AMA Style

Taku Saiki. High-voltage Pulse Generation Using Electrostatic Induction in Capacitor. Int J Electr Compon Energy Convers. 2019;5(2):20-29. doi: 10.11648/j.ijecec.20190502.11

Copy | Download

@article{10.11648/j.ijecec.20190502.11,
  author = {Taku Saiki},
  title = {High-voltage Pulse Generation Using Electrostatic Induction in Capacitor},
  journal = {International Journal of Electrical Components and Energy Conversion},
  volume = {5},
  number = {2},
  pages = {20-29},
  doi = {10.11648/j.ijecec.20190502.11},
  url = {https://doi.org/10.11648/j.ijecec.20190502.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijecec.20190502.11},
  abstract = {Pulse power sources can produce high temperature or high-density extreme conditions within a short time. They have been introduced to various fields such as those in laser, fusion research, the production of plasma, shockwaves in water, water treatment, and exhaust gas treatments. Various high voltage pulse sources using insulated-gate bipolar transistor (IGBT) semiconductors with high voltage resistivity have been used. Also, Marx bank circuit is well known as an instrument that produces voltage pulses with low repetitive rates. These instruments have several advantages. However, their problems are a complex structure, high cost, and excessive weight. A simple method of producing high voltage pulses with short rising times based on electrostatic induction in external capacitor used for pulse power applications is proposed. The circuit has a simple structure and contains a minimum number of parts, which makes the instrument small and light weight. In fact, the generation of sawtoothed high voltage pulses with short rising times and low repetitive rates of a few 100 Hz was successfully conducted in experiments. Theoretical analysis was simultaneously undertaken. The numerically calculated results for generating high voltage pulses were goodly consistent with the experimental ones. Moreover, it has been confirmed that amplification of the output voltage by electro-hydrodynamics (EHD) electricity generation using a jet flame resulted in higher voltage pulses, lower electricity consumption, and high repetition rates.},
 year = {2019}
}

Copy | Download