American Journal of Construction and Building Materials

| Peer-Reviewed |

Mechanical Performance of Cement Composites Reinforced with Raffia Palm Fabric

Received: Oct. 25, 2019    Accepted: Nov. 25, 2019    Published: Feb. 10, 2020
Views:       Downloads:

Share This Article

Abstract

The utilization of plant based (natural) fabrics as reinforcement in composite materials is fast growing in the engineering field, due to their environmental friendliness and appreciable mechanical properties. This study was carried out to evaluate some flexural properties (flexural strength and flexural deflection) and water absorption rate of raffia palm fabric reinforced cement composite samples. Ordinary Portland cement (grade 42.5N) was used as the binding material. Cement to fine aggregate (450 µm) mix ratio of 1:3 (by weight) was employed for the composite production, while a water to cement ratio (w/c) of 0.4 was adopted. For the purpose of this study, cement composite beams were reinforced with raffia palm fabrics in 1-fabric, 2-fabrics and 2-layer configuration. All the cement composite samples were prepared and tested in accordance to ASTM standard procedures. Results from the flexural tests showed that the flexural properties of the composite samples were highly influenced by the raffia palm fabric reinforcement. The composite samples reinforced with 2- layers generally had higher flexural properties, when compared to the results obtained from the composite reinforced with 2-fabrics and 1 – fabrics reinforcement. The ultimate flexural deflection attained in the 2-fabrics and 2-layers configurations were comparable, but slightly highly in the 2-layers. A mean deflection of 6.12 mm was recorded in the composite reinforced with 2-layers, which was higher than the mean deflection of 5.56 mm recorded for the composite reinforced with 2-fabrics. For all cases, the unreinforced cement composite (control Samples) had the poorest flexural properties. In terms of the water absorption rate, the 2- layers fabrics composite samples had the highest water absorption rate when compared to the 1-layer fabric reinforced composite samples and the control samples. These results will be useful in the building industry and in the design and development of natural fabric reinforced concrete structures.

DOI 10.11648/j.ajcbm.20200401.11
Published in American Journal of Construction and Building Materials ( Volume 4, Issue 1, June 2020 )
Page(s) 1-7
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Cement, Raffia Palm Fabric, Composite Material, Flexural Properties, Water Absorption

References
[1] Yan, L. B. and Chouw, N. (2014). Sustainable Concrete and Structures with Natural Fibre Reinforcement. Infrastructure Corrosion and Durability – A Sustainability Study. Editor: Yang Lu, OMICS Group Incorporation.
[2] Ravikumar, C. S., Ramasamy, V. and Thandavamoorthy, T. S. (2015). Effect of fibers in concrete composites. International Journal of Applied Engineering Research, 10 (1): 419-429.
[3] Pacheco-Torgal, F. and Jalali, S. (2011). Cementitous building materials reinforced with vegetable fibres: A review. Constr Build Mater 25: 575-581.
[4] Yan, L. B. and Chouw, N. (2013). Behavior and analytical modeling of natural flax fibre reinforced polymer tube confined plain concrete and coir fibre reinforced concrete. J Compos Mater, 47 (17): 2133-2148.
[5] El Messiry, M. (2013). Theoretical analysis of natural fiber volume fraction of reinforced composites, A. E. J. 52: 301–306.
[6] Umurhurhu, B. and Uguru, H. (2019). Tensile behaviour of oil bean pod shell and mahogany sawdust reinforced epoxy resin composite. International Journal of Science, Technology and Society. 7 (1): 1-7. doi: 10.11648/j.ijsts.20190701.11.
[7] Uguru, H. and Umurhurhu, B. (2018). Effect of alkaline treatment on tensile properties of raffia palm fibre. Direct Research Journal of Engineering and Information Technology. 5 (4): 28-31.
[8] Dittenber, D. B. and GangaRao, H. V. S (2012). Critical review of recent publications on use of natural composites in infrastructure. Composites Part A 43 (8): 1419-1429.
[9] Assarar, M., Scida, D., El Mahi, A., Poilâne, C. and Ayad, R. (2011). Influence of water ageing on mechanical properties and damage events of two reinforced composite materials: Flax–fibres and glass–fibres. Mater & Des 32 (2): 788-795.
[10] Peled, A., and Bentur, A. (2000). Geometrical characteristics and efficiency of textile fabrics for reinforcing composites. Cem. Concr. Res., 30, 781–790.
[11] Motaleb, K. Z. M. (2018). Improvement of mechanical properties by alkali treatment on pineapple and jute fabric reinforced polyester resin composites. International Journal of Composite Materials, 8 (2): 32-37.
[12] Puri, N., Kumar, B. and Tyagi, H. (2013). Utilization of Recycled Wastes as Ingredients in Concrete Mix. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 2 (2), 74-78.
[13] Peled, A., Bentur, A. and Yankelevsky, D. (1999). Flexural performance of cementitious composites reinforced by woven fabrics. Journal of Materials in Civil Engineering (ASCE). 325–330.
[14] Peled, A., Zaguri, E. and Marom, G. (2008). Bonding characteristics of multifilament polymer yarns and cement matrices. Composites A, 39: 930–939. doi: 10.1016/j.compositesa. 2008.03.012.
[15] Colombo, I. G., Magri, A., Zani, G., Colombo, M and Prisco, M. (2013). Textile reinforced concrete: experimental investigation on design parameters. Materials and Structures, 46: 1953–1971.
[16] Akpokodje, O. I. Uguru, H. and Esegbuyota, D. (2019). Study of mechanical behaviour of natural fibres reinforced concrete. World Journal of Civil Engineering and Construction Technology. Article in Press.
[17] Owen, M. M. (2014). The effects of alkali treatment on the mechanical properties of jute fabric reinforced epoxy composites. International Journal of Fiber and Textile Research, 4 (2): 32-40.
[18] Reis, J. (2006). Fracture and flexural characterization of natural fibre-reinforced polymer concrete. Constr Build Mater 20 (9): 673–678.
[19] Islam, S. M., Hussain, R. R., Morshed, M. A. Z. (2012) Fiber-reinforced concrete incorporating locally available natural fibers in normal- and high-strength concrete and a performance analysis with steel fiber-reinforced composite concrete. J Compos Materi 46 (1): 111-122.
[20] El Messiry, M., El-Tarfawy, S. and El Deeb, R. (2017). Study pultruded Jute fabric effect on the cementitious thin composites mechanical properties with low fiber volume fraction. Alexandria Engineering Journal, 56: 415–421.
[21] Aho, I. O. and Ndububa, E. E. (2015). Compressive and flexural strength of cement mortar stabilized with raffia palm fruit peel (RPEP). Global Journal of Engineering Research, 14: 1-7.
[22] El Messiry, M., EL Tarfawy, S., and EL Deeb, R. (2015). Mechanical performance of cementitious composites reinforced with pultruded jute/polymeric matrix fabric, J. Mater. Sci. Eng. 4 (3): 1–6.
[23] Peled, A. and Mobasher, B. (2007). Tensile behavior of fabric cement-based composites: pultruded and cast. Journal of Materials in Civil Engineering, 19 (4): 340–348.
Cite This Article
  • APA Style

    Akpokodje Ovie Isaac, Akpituren Mogbeyi Benjamin. (2020). Mechanical Performance of Cement Composites Reinforced with Raffia Palm Fabric. American Journal of Construction and Building Materials, 4(1), 1-7. https://doi.org/10.11648/j.ajcbm.20200401.11

    Copy | Download

    ACS Style

    Akpokodje Ovie Isaac; Akpituren Mogbeyi Benjamin. Mechanical Performance of Cement Composites Reinforced with Raffia Palm Fabric. Am. J. Constr. Build. Mater. 2020, 4(1), 1-7. doi: 10.11648/j.ajcbm.20200401.11

    Copy | Download

    AMA Style

    Akpokodje Ovie Isaac, Akpituren Mogbeyi Benjamin. Mechanical Performance of Cement Composites Reinforced with Raffia Palm Fabric. Am J Constr Build Mater. 2020;4(1):1-7. doi: 10.11648/j.ajcbm.20200401.11

    Copy | Download

  • @article{10.11648/j.ajcbm.20200401.11,
      author = {Akpokodje Ovie Isaac and Akpituren Mogbeyi Benjamin},
      title = {Mechanical Performance of Cement Composites Reinforced with Raffia Palm Fabric},
      journal = {American Journal of Construction and Building Materials},
      volume = {4},
      number = {1},
      pages = {1-7},
      doi = {10.11648/j.ajcbm.20200401.11},
      url = {https://doi.org/10.11648/j.ajcbm.20200401.11},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.ajcbm.20200401.11},
      abstract = {The utilization of plant based (natural) fabrics as reinforcement in composite materials is fast growing in the engineering field, due to their environmental friendliness and appreciable mechanical properties. This study was carried out to evaluate some flexural properties (flexural strength and flexural deflection) and water absorption rate of raffia palm fabric reinforced cement composite samples. Ordinary Portland cement (grade 42.5N) was used as the binding material. Cement to fine aggregate (450 µm) mix ratio of 1:3 (by weight) was employed for the composite production, while a water to cement ratio (w/c) of 0.4 was adopted. For the purpose of this study, cement composite beams were reinforced with raffia palm fabrics in 1-fabric, 2-fabrics and 2-layer configuration. All the cement composite samples were prepared and tested in accordance to ASTM standard procedures. Results from the flexural tests showed that the flexural properties of the composite samples were highly influenced by the raffia palm fabric reinforcement. The composite samples reinforced with 2- layers generally had higher flexural properties, when compared to the results obtained from the composite reinforced with 2-fabrics and 1 – fabrics reinforcement. The ultimate flexural deflection attained in the 2-fabrics and 2-layers configurations were comparable, but slightly highly in the 2-layers. A mean deflection of 6.12 mm was recorded in the composite reinforced with 2-layers, which was higher than the mean deflection of 5.56 mm recorded for the composite reinforced with 2-fabrics. For all cases, the unreinforced cement composite (control Samples) had the poorest flexural properties. In terms of the water absorption rate, the 2- layers fabrics composite samples had the highest water absorption rate when compared to the 1-layer fabric reinforced composite samples and the control samples. These results will be useful in the building industry and in the design and development of natural fabric reinforced concrete structures.},
     year = {2020}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Mechanical Performance of Cement Composites Reinforced with Raffia Palm Fabric
    AU  - Akpokodje Ovie Isaac
    AU  - Akpituren Mogbeyi Benjamin
    Y1  - 2020/02/10
    PY  - 2020
    N1  - https://doi.org/10.11648/j.ajcbm.20200401.11
    DO  - 10.11648/j.ajcbm.20200401.11
    T2  - American Journal of Construction and Building Materials
    JF  - American Journal of Construction and Building Materials
    JO  - American Journal of Construction and Building Materials
    SP  - 1
    EP  - 7
    PB  - Science Publishing Group
    SN  - 2640-0057
    UR  - https://doi.org/10.11648/j.ajcbm.20200401.11
    AB  - The utilization of plant based (natural) fabrics as reinforcement in composite materials is fast growing in the engineering field, due to their environmental friendliness and appreciable mechanical properties. This study was carried out to evaluate some flexural properties (flexural strength and flexural deflection) and water absorption rate of raffia palm fabric reinforced cement composite samples. Ordinary Portland cement (grade 42.5N) was used as the binding material. Cement to fine aggregate (450 µm) mix ratio of 1:3 (by weight) was employed for the composite production, while a water to cement ratio (w/c) of 0.4 was adopted. For the purpose of this study, cement composite beams were reinforced with raffia palm fabrics in 1-fabric, 2-fabrics and 2-layer configuration. All the cement composite samples were prepared and tested in accordance to ASTM standard procedures. Results from the flexural tests showed that the flexural properties of the composite samples were highly influenced by the raffia palm fabric reinforcement. The composite samples reinforced with 2- layers generally had higher flexural properties, when compared to the results obtained from the composite reinforced with 2-fabrics and 1 – fabrics reinforcement. The ultimate flexural deflection attained in the 2-fabrics and 2-layers configurations were comparable, but slightly highly in the 2-layers. A mean deflection of 6.12 mm was recorded in the composite reinforced with 2-layers, which was higher than the mean deflection of 5.56 mm recorded for the composite reinforced with 2-fabrics. For all cases, the unreinforced cement composite (control Samples) had the poorest flexural properties. In terms of the water absorption rate, the 2- layers fabrics composite samples had the highest water absorption rate when compared to the 1-layer fabric reinforced composite samples and the control samples. These results will be useful in the building industry and in the design and development of natural fabric reinforced concrete structures.
    VL  - 4
    IS  - 1
    ER  - 

    Copy | Download

Author Information
  • Department of Civil Engineering Technology, Delta State Polytechnic, Ozoro, Nigeria

  • Department of Civil Engineering Technology, Delta State Polytechnic, Ozoro, Nigeria

  • Section